CQB টেফলন আস্তরণযুক্ত চৌম্বকীয় পাম্প

আবেদন
Corrosive, pure and contaminated media in the chemical, pharmaceutics and petrochemical industries, in metal processing, waste water treatment;
. When stainless steel is not sufficiently resistant;
. An alternative to expensive haste alloy, titanium alloy pumps;
যখন আঠালো-রোধী পৃষ্ঠতল গুরুত্বপূর্ণ।


তরল পাম্প করা
1. Acid and caustic liquid
2. Oxidizer corrosive liquids
3. Difficult-to-seal liquids
4. সালফিউরিক এসিড
5. Hydroelectric acid
6. নাইট্রিক এসিড
7. Acid and lye
8. Nitromuriatic acid

-Leak-proof design.

Seal-less Teflon lined magnetic drive pump, driven by magnetic coupling indirectly. The motor shaft and pump chamber is completely sealed, which avoids pump leakage problem and use site pollution.

- Maintenance convenient and long service life. Cost-intensive wearing parts are canceled by the seal-less method of construction, which reduces maintenance costs and prolongs service life.

. Virgin Fluorplastic  
- অনেক সহজ এবং আরও নির্ভরযোগ্য গুণমান নিয়ন্ত্রণ
- ভেদ্যতা প্রতিরোধে কোনো হ্রাস হয় না।
- বিশুদ্ধ ঔষধীয় এবং সূক্ষ্ম রাসায়নিক মাধ্যম: কোনো দূষণ নেই

With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN; ANSI, BS; JIS. For flushing system and monitoring device as required, the draining nozzle will be offered.

The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Spacer sleeve is made of Carbon-fiber-reinforced plastic [CFRP], efficiency and operational reliability benefit from this. Even low flow rates or media near their boiling point can be conveyed without the introduction of heat. 

ক্লোজ ইম্পেলার

-Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates. Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media.

মডেল আইডেন্টিফিকেশন

মডেল এবং পরামিতি  
         ডিজাইন চাপ: ১.৬ মেগাপ্যাসকেল